Thermoplastic Powder Coating Data Sheets:

  • Encase G35 – Low density polyethylene (LDPE) thermoplastic powder coating designed for encapsulation coating of wire goods – PDF Download
  • Glas-Lok GLS – A functionalized polyethylene co-polymer thermoplastic powder coating designed specifically for glass coating applications that require UV-stabilization – PDF Download
  • Polyarmor G15 – This product is a high flow, functionalized polyethylene co-polymer thermoplastic powder coating designed for low temperature applications on heat sensitive materials such as thin metal substrates and electrical components. It wets and flows quickly allowing minimal heat history. – PDF Download
  • Polyarmor G17 – A functionalized polyethylene co-polymer thermoplastic powder coating designed for maximum mechanical performance, impact resistance and UV-stability. Polyarmor® G17 is a very durable coating for outdoor applications. – PDF Download
  • Polyarmor G17T – A functionalized polyethylene co-polymer thermoplastic powder coating designed for maximum mechanical performance, impact resistance and UV-stability. Polyarmor® G17 Texture is a non-skid protective coating. – PDF Download
  • Polyarmor G18 – A functionalized polyethylene co-polymer thermoplastic powder coating designed especially for “Oil & Gas Pipeline” applications where maximum mechanical performance, impact resistance and UV-stability is required. Polyarmor® G18 is a good general purpose protective coating.  – PDF Download
  • Polyarmor G32 – A functionalized polyethylene co-polymer thermoplastic powder coating that exhibits excellent impact resistance and UV-stability. Polyarmor® G32 is designed to have a slightly higher Melt Index which assists in areas where out gassing is an issue such as applications on hot dipped galvanized steel.  – PDF Download
  • Polyarmor G50 – A functionalized polyethylene co-polymer thermoplastic powder coating designed for maximum mechanical performance, impact resistance and UV-stability. Polyarmor® G50 is a very durable coating for outdoor applications. – PDF Download
  • Waterarmor G17 – A functionalized polyethylene co-polymer thermoplastic powder coating designed for maximum mechanical performance, impact resistance and UV-stability. Waterarmor™ G17 is ideal solution for coating pipes used in the transport of potable water.  These products are NSF approved and are Bisphenol A (BPA) free. Waterarmor™ G17 can be applied to the exterior of ductile water pipes and the interior and exterior of ductile fittings.  They may also be applied to the interior and exterior of steel pipes and steel fittings. – PDF Download

As thermoplastic powder coating can be tricky to apply, we have collated some useful information. Take a look at our handy guides below.

We’ve tried to cover what are the most common issues experienced with using powder coating. If you have a different challenge, please do not hesitate to contact us.

Introduction to Nylon Coating

Introduction to Vinyl Coating

Troubleshooting Guide for Electrostatic Coating
Troubleshooting Guide for Fluid Bed Coating

Particle Size Chart